MyPhone Agua Rio v2 Firmware Download Link tested by sr rafique

 ou need this firmware/stock rom if you have encountered this kind of problem in your phone.Listed Below

1.Hang in logo
2.Rebooting
3.Bootloop
4.Dead Phone But detected in PC

Some firmware files may be zipped. Please use either WinRAR or 7-Zip to extract. If a firmware file has been divided into multiple parts, use either program to combine into a single file.

Downloads:

MyPhone Agua Rio v2 Firmware

updated no password
VCom Drivers
Drivers Auto Installer
Sp Flash Tools
Sp Flash Tools
After finish downloading all files put in one folder in desktop to easily navigate the files.

Installing Drivers

First thing first,Before you can flash/install rom in your phone you must secure first that your phone is detected in your PC.

If you using Window 7 OS
Connect your phone in PC using Micro USB Cable in turn-off mode and open Drivers Auto Installer and run the install-window batch file.Like shown in the image.

The drivers will automatically installed in your PC.

If You using  Window XP

Connect your phone in PC using Micro USB Cable in turn-off mode while pressing Volume Up or Volume Down.This will detect and look for the driver.

 1. This is the first time that you will connect your phone and it will search for the correct driver. 

2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.

3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard...

Flashing/Install new Firmware/Stock ROM

1.Open Sp Flash tool

2.Click Scatter-loading and browse for MT6572_Android_scatter

3.Now,Click Download and connect your phone while power off.

4.When successfully connected the progress bar will run and change it colors and wait until you dialog window saying Download Ok.

Some workarounds:

If you encounter PMT_Changed error here is what you do:

In Older Version of FlashTool

Load the scatter file

Click in Format (a new menu will popup)

Make sure that you select Format whole flash except bootloader then press OK

Connect your phone in bootmode (Turn off your device then hold Volume UP or VOLUME DOWN then insert USB)

It should detect your phone and continue to flash.

Then Click Download to fully flash your phone.

Hard Reset your phone after flashing.

In Latest version of Flashtool

Load the scatter file

Choose Format + Download (Underneath Scatter-loading file)

Then Click Download and wait until it is done flashing

For Invalid IMEI:

Your Phone/Tablet must be rooted first

Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.